About Shamrock Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Shamrock: Wheeler County Fire 154.2425 MHz, narrow FM, 466 DPL. County-level ems dispatch that covers Shamrock: Wheeler County EMS 155.0400 MHz, narrow FM, 466 DPL.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Shamrock conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Shamrock Fire | Shamrock Fire – Tactical Channel | 155.0400 | 186.2 PL | FMN | KNDK917 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Shamrock Hospital | EMS to Hospital patient reports | 463.0000 In 468.0000 | 136.5 PL | FMN | — |
Wheeler County channels that also cover Shamrock
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wheeler County Fire | Wheeler County Fire – Dispatch (North PANCOM) | 154.2425 In 155.9775 | 466 DPL | FMN | WQGT208 |
| Wheeler County Fire | Wheeler County Fire – Dispatch (North PANCOM) | 154.2425 In 155.9775 | NAC 61F | P25 | WQGT208 |
| Wheeler County Fire | Wheeler County Fire – Dispatch (South PANCOM) | 154.8675 In 155.9775 | 466 DPL | FMN | WQGT208 |
| Wheeler County Fire | Wheeler County Fire – Dispatch (South PANCOM) | 154.8675 In 155.9775 | NAC 61F | P25 | WQGT208 |
| Wheeler County Fire | Fire/EMS Paging Countywide | 155.7675 | 466 DPL | FMN | WQGT208 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wheeler County EMS | Wheeler County EMS – Dispatch (South PANCOM) | 155.0400 In 159.0450 | 466 DPL | FMN | WQGT208 |
| Wheeler County EMS | Wheeler County EMS – Dispatch (South PANCOM) | 155.0400 In 159.0450 | NAC 61F | P25 | WQGT208 |
| Wheeler County EMS | Wheeler County EMS – Dispatch (North PANCOM) | 155.1975 In 159.0450 | 466 DPL | FMN | WQGT208 |
| Wheeler County EMS | Wheeler County EMS – Dispatch (North PANCOM) | 155.1975 In 159.0450 | NAC 61F | P25 | WQGT208 |
Nearest trunked radio sites
Distances are measured from the center of Shamrock.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Shamrock?
We do not have a fire dispatch channel listed specifically for Shamrock. The county-level fire dispatch channels in the same county: Wheeler County Fire 154.2425 MHz, narrow FM, 466 DPL.
What frequency does EMS or the ambulance service use in Shamrock?
We do not have a EMS dispatch channel listed specifically for Shamrock. The county-level EMS dispatch channels in the same county: Wheeler County EMS 155.0400 MHz, narrow FM, 466 DPL.
What scanner do I need to listen to fire and EMS in Shamrock?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Shamrock?
For Shamrock, start with the Borger site of Amarillo Radio Communications System (ARCS). Its control channels are 772.65625, 773.45625, 774.48125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Shamrock fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Shamrock are marked encrypted.