Skip to content

Jacksboro Fire and EMS Frequencies

We do not have frequencies listed specifically for Jacksboro in Jack County, Texas yet. Countywide channels for Jack County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Agnes VHF (North Texas Interoperable Radio Network (NTIRN)), about 27 miles away.

About Jacksboro Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Jacksboro: Jack County Fire 156.1800 MHz, narrow FM, 127.3 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Jack County channels that also cover Jacksboro

Fire Dispatch

Fire Dispatch frequencies for Jack County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jack County FireJack County Fire – Analog (mixed mode)156.1800
In 159.0450
127.3 PLFMNWPVA253
Jack County FireJack County Fire – Digital (mixed mode)156.1800
In 159.0450
NAC 028P25WPVA253

Nearest trunked radio sites

Distances are measured from the center of Jacksboro.

Agnes VHF · North Texas Interoperable Radio Network (NTIRN)
RFSS 5 · Site 4 (hex 4) · NAC 443 · about 27 mi away
Control 152.12, 152.78, 154.25
Voice 152.6, 155.7375
Wise Simulcast · Wise County P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 7B2 · about 28 mi away
Control 151.25, 154.01, 154.2125, 155.265, 155.6325, 155.88
Cool VHF · North Texas Interoperable Radio Network (NTIRN)
RFSS 5 · Site 5 (hex 5) · NAC 444 · about 31 mi away
Control 152.81, 155.7225, 158.7825
Voice 152.585
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Jacksboro?

We do not have a fire dispatch channel listed specifically for Jacksboro. The county-level fire dispatch channels in the same county: Jack County Fire 156.1800 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Jacksboro?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Jacksboro?

For Jacksboro, start with the Agnes VHF site of North Texas Interoperable Radio Network (NTIRN). Its control channels are 152.12, 152.78, 154.25 MHz. Program a control channel first; the scanner finds the voice channels from it.