Skip to content

Sunset Fire and EMS Frequencies

We do not have frequencies listed specifically for Sunset in Montague County, Texas yet. Countywide channels for Montague County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Wise Simulcast (Wise County P25), about 18 miles away.

About Sunset Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Sunset: Montague County Fire 154.3250 MHz, narrow FM, 94.8 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Montague County channels that also cover Sunset

Fire Dispatch

Fire Dispatch frequencies for Montague County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montague County FireFire/EMS Dispatch154.3250
In 153.9500
94.8 PLFMNWNWX616
Montague County FireFire/EMS Dispatch154.3250
In 153.9500
NAC 293P25WNWX616

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Montague County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montague County FireMontague County Fire – Tactical Channel (Analog)155.6100
In 151.4450
82.5 PLFMNWQOE653
Montague County FireMontague County Fire – Tactical Channel (Digital)155.6100
In 151.4450
NAC 290P25WQOE653

Nearest trunked radio sites

Distances are measured from the center of Sunset.

Wise Simulcast · Wise County P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 7B2 · about 18 mi away
Control 151.25, 154.01, 154.2125, 155.265, 155.6325, 155.88
Muenster · Denton County Regional Radio System
RFSS 1 · Site 4 (hex 4) · NAC 690 · about 28 mi away
Control 772.68125, 774.49375
Voice 771.25625
Agnes VHF · North Texas Interoperable Radio Network (NTIRN)
RFSS 5 · Site 4 (hex 4) · NAC 443 · about 32 mi away
Control 152.12, 152.78, 154.25
Voice 152.6, 155.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sunset?

We do not have a fire dispatch channel listed specifically for Sunset. The county-level fire dispatch channels in the same county: Montague County Fire 154.3250 MHz, narrow FM, 94.8 PL.

What scanner do I need to listen to fire and EMS in Sunset?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Sunset?

For Sunset, start with the Wise Simulcast site of Wise County P25. Its control channels are 151.25, 154.01, 154.2125, 155.265 MHz. Program a control channel first; the scanner finds the voice channels from it.