Skip to content

Bellevue Fire and EMS Frequencies

We do not have frequencies listed specifically for Bellevue in Clay County, Texas yet. Countywide channels for Clay County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Wise Simulcast (Wise County P25), about 36 miles away.

About Bellevue Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bellevue: Charlie/Thornberry Volunteer Fire Department 158.7825 MHz, narrow FM, 173.8 PL; Clay County Fire 154.3700 MHz, narrow FM, 203.5 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Clay County channels that also cover Bellevue

Fire Dispatch

Fire Dispatch frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Charlie/Thornberry Volunteer Fire DepartmentCharlie/Thornberry Volunteer Fire Department – Dispatch158.7825
In 154.0100
173.8 PLFMNWSHG769
Clay County FireClay County Fire – Dispatch (multicast with 154.415 and 158.7825)154.3700
In 150.7900
203.5 PLFMNWSHM321

Nearest trunked radio sites

Distances are measured from the center of Bellevue.

Wise Simulcast · Wise County P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 7B2 · about 36 mi away
Control 151.25, 154.01, 154.2125, 155.265, 155.6325, 155.88
Muenster · Denton County Regional Radio System
RFSS 1 · Site 4 (hex 4) · NAC 690 · about 39 mi away
Control 772.68125, 774.49375
Voice 771.25625
Agnes VHF · North Texas Interoperable Radio Network (NTIRN)
RFSS 5 · Site 4 (hex 4) · NAC 443 · about 47 mi away
Control 152.12, 152.78, 154.25
Voice 152.6, 155.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bellevue?

We do not have a fire dispatch channel listed specifically for Bellevue. The county-level fire dispatch channels in the same county: Charlie/Thornberry Volunteer Fire Department 158.7825 MHz, narrow FM, 173.8 PL; Clay County Fire 154.3700 MHz, narrow FM, 203.5 PL.

What scanner do I need to listen to fire and EMS in Bellevue?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Bellevue?

For Bellevue, start with the Wise Simulcast site of Wise County P25. Its control channels are 151.25, 154.01, 154.2125, 155.265 MHz. Program a control channel first; the scanner finds the voice channels from it.