About Jolly Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Jolly: Charlie/Thornberry Volunteer Fire Department 158.7825 MHz, narrow FM, 173.8 PL; Clay County Fire 154.3700 MHz, narrow FM, 203.5 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Clay County channels that also cover Jolly
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Charlie/Thornberry Volunteer Fire Department | Charlie/Thornberry Volunteer Fire Department – Dispatch | 158.7825 In 154.0100 | 173.8 PL | FMN | WSHG769 |
| Clay County Fire | Clay County Fire – Dispatch (multicast with 154.415 and 158.7825) | 154.3700 In 150.7900 | 203.5 PL | FMN | WSHM321 |
Nearest trunked radio sites
Distances are measured from the center of Jolly.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Jolly?
We do not have a fire dispatch channel listed specifically for Jolly. The county-level fire dispatch channels in the same county: Charlie/Thornberry Volunteer Fire Department 158.7825 MHz, narrow FM, 173.8 PL; Clay County Fire 154.3700 MHz, narrow FM, 203.5 PL.
What scanner do I need to listen to fire and EMS in Jolly?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Jolly?
For Jolly, start with the Muenster site of Denton County Regional Radio System. Its control channels are 772.68125, 774.49375 MHz. Program a control channel first; the scanner finds the voice channels from it.