About Decatur Fire and EMS Frequencies
Quick answer: Fire dispatch for Decatur: Decatur Fire 154.3550 MHz, narrow FM, 131.8 PL. Trunked: Wise County P25 (Project 25), for example Wise County Fire talkgroup 31001 (hex 7919).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Wise County P25 (Project 25): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Decatur, start with the Wise Simulcast site of Wise County P25, about 5 miles away. Its control channels: 151.25, 154.01, 154.2125 MHz.
Data updated .
Decatur conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Decatur Fire | Decatur Fire Dispatch Only | 154.3550 In 156.0150 | 131.8 PL | FMN | KNFZ699 |
| Decatur Fire | Decatur Fire Operations | 155.1825 In 159.0375 | NAC 065 | P25 | WQOK550 |
Wise County channels that also cover Decatur
Wise County P25
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wise County Fire | Wise County Fire – Dispatch | 31001 | 7919 | T |
| Wise County Fire | County Fire | 31002 | 791a | T |
| Wise County Fire | County Fire | 31003 | 791b | T |
| Wise County Fire | County Fire | 31004 | 791c | T |
| Wise County Fire | County Fire | 31005 | 791d | T |
| Wise County Fire | County Fire | 31006 | 791e | T |
| Wise County Fire | County Fire | 31007 | 791f | T |
| Wise County Fire | County Fire | 31008 | 7920 | T |
| Wise County Fire | County Fire | 31009 | 7921 | T |
| Wise County Fire | County Fire | 31010 | 7922 | T |
| Wise County Fire | County Fire | 31011 | 7923 | T |
Nearest trunked radio sites
Distances are measured from the center of Decatur.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Decatur?
Fire dispatch channels listed for Decatur: Decatur Fire 154.3550 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Decatur?
Yes. The county-level systems that cover Decatur are Fire and EMS talkgroups are listed for Wise County P25 (Project 25): 11 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Decatur?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Decatur?
For Decatur, start with the Wise Simulcast site of Wise County P25. Its control channels are 151.25, 154.01, 154.2125, 155.265 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Decatur fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Decatur are marked encrypted.