Skip to content

Bryson Fire and EMS Frequencies

Bryson in Jack County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Cool VHF (North Texas Interoperable Radio Network (NTIRN)), about 35 miles away.

About Bryson Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bryson: Jack County Fire 156.1800 MHz, narrow FM, 127.3 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Bryson conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bryson
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bryson FireBryson Fire – Fire Ground155.9250127.3 PLFMWQAI410

Jack County channels that also cover Bryson

Fire Dispatch

Fire Dispatch frequencies for Jack County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jack County FireJack County Fire – Analog (mixed mode)156.1800
In 159.0450
127.3 PLFMNWPVA253
Jack County FireJack County Fire – Digital (mixed mode)156.1800
In 159.0450
NAC 028P25WPVA253

Nearest trunked radio sites

Distances are measured from the center of Bryson.

Cool VHF · North Texas Interoperable Radio Network (NTIRN)
RFSS 5 · Site 5 (hex 5) · NAC 444 · about 35 mi away
Control 152.81, 155.7225, 158.7825
Voice 152.585
Agnes VHF · North Texas Interoperable Radio Network (NTIRN)
RFSS 5 · Site 4 (hex 4) · NAC 443 · about 37 mi away
Control 152.12, 152.78, 154.25
Voice 152.6, 155.7375
Wise Simulcast · Wise County P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 7B2 · about 42 mi away
Control 151.25, 154.01, 154.2125, 155.265, 155.6325, 155.88
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bryson?

We do not have a fire dispatch channel listed specifically for Bryson. The county-level fire dispatch channels in the same county: Jack County Fire 156.1800 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Bryson?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Bryson?

For Bryson, start with the Cool VHF site of North Texas Interoperable Radio Network (NTIRN). Its control channels are 152.81, 155.7225, 158.7825 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bryson fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Bryson are marked encrypted.