About Graham Fire and EMS Frequencies
Quick answer: Fire dispatch for Graham: Graham Fire 154.4000 MHz, narrow FM, 127.3 PL.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Graham conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Graham Fire | Fire/EMS Channel 1 Primary | 154.4000 In 150.8050 | 127.3 PL | FMN | KNIF484 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Graham Fire | Channel 2 Tactical | 154.1750 | FMN | KNIF484 |
Young County channels that also cover Graham
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Young County Fire | Rural Fire Simulcast – Murray | 151.4525 In 159.2400 | 173.8 PL | FMN | WQJK867 |
| Young County Fire | Rural Fire Simulcast – Newcastle | 156.0000 In 154.2050 | 114.8 PL | FMN | WQJK867 |
| Young County Fire | Rural Fire Simulcast – Loving | 158.7675 In 153.9200 | 141.3 PL | FMN | WQJK867 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Young County EMS | EMS Med | 462.9500 | FM | WNBX301 | |
| Young County EMS | EMS Med | 463.1750 In 468.1750 | FM | WNBX301 |
Nearest trunked radio sites
Distances are measured from the center of Graham.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Graham?
Fire dispatch channels listed for Graham: Graham Fire 154.4000 MHz, narrow FM, 127.3 PL.
What scanner do I need to listen to fire and EMS in Graham?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Graham?
For Graham, start with the Cool VHF site of North Texas Interoperable Radio Network (NTIRN). Its control channels are 152.81, 155.7225, 158.7825 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Graham fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Graham are marked encrypted.