Skip to content

Harper Fire and EMS Frequencies

We do not have frequencies listed specifically for Harper in Gillespie County, Texas yet. Countywide channels for Gillespie County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kerr County (Greater Austin/Travis Regional Radio System (GATRRS)), about 15 miles away.

About Harper Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Harper: Gillespie County Fire 154.0325 MHz, narrow FM, 179.9 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Gillespie County channels that also cover Harper

Fire Dispatch

Fire Dispatch frequencies for Gillespie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gillespie County FireFire/EMS West Repeater154.0325
In 150.8050
179.9 PLFMNWQEL268
Gillespie County FireFire/EMS Dispatch Central Repeater154.4450
In 153.8900
162.2 PLFMNWNLN713
Gillespie County FireFire/EMS East Repeater155.8875
In 153.9425
162.2 PLFMNWQEL268

Nearest trunked radio sites

Distances are measured from the center of Harper.

Kerr County · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 22 (hex 16) · NAC 130 · about 15 mi away
Control 155.385, 155.55
Voice 155.085, 155.235
Mason · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 54 (hex 36) · NAC 130 · about 30 mi away
Control 151.2425, 154.7475
Voice 151.0925, 154.1975
Stonewall · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 64 (hex 40) · NAC 130 · about 38 mi away
Control 151.0475, 151.49
Voice 159.4725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Harper?

We do not have a fire dispatch channel listed specifically for Harper. The county-level fire dispatch channels in the same county: Gillespie County Fire 154.0325 MHz, narrow FM, 179.9 PL.

What scanner do I need to listen to fire and EMS in Harper?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Harper?

For Harper, start with the Kerr County site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 155.385, 155.55 MHz. Program a control channel first; the scanner finds the voice channels from it.