Skip to content

Junction Fire and EMS Frequencies

Junction in Kimble County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Mason (Greater Austin/Travis Regional Radio System (GATRRS)), about 35 miles away.

About Junction Fire and EMS Frequencies

Quick answer: Fire dispatch for Junction: Junction Fire 154.3700 MHz, narrow FM, 97.4 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Junction conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Junction
AgencyDescriptionFrequency (MHz)ToneModeFCC
Junction FireFire/EMS Primary (includes Kimble County)154.3700
In 153.9500
97.4 PLFMNWQCE381

Nearest trunked radio sites

Distances are measured from the center of Junction.

Mason · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 54 (hex 36) · NAC 130 · about 35 mi away
Control 151.2425, 154.7475
Voice 151.0925, 154.1975
Rocksprings · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 27 (hex 1B) · NAC 13E · about 41 mi away
Control 151.07, 154.0025
Voice 154.7625
Kerr County · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 22 (hex 16) · NAC 130 · about 42 mi away
Control 155.385, 155.55
Voice 155.085, 155.235
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Junction?

Fire dispatch channels listed for Junction: Junction Fire 154.3700 MHz, narrow FM, 97.4 PL.

What scanner do I need to listen to fire and EMS in Junction?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Junction?

For Junction, start with the Mason site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 151.2425, 154.7475 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Junction fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Junction are marked encrypted.