About Ingram Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Ingram: Kerr County Fire 155.7975 MHz, narrow FM, 365 DPL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Kerr County Fire talkgroup 46330 (hex b4fa).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Ingram, start with the Kerr County site of Greater Austin/Travis Regional Radio System (GATRRS), about 4 miles away. Its control channels: 155.385, 155.55 MHz.
Data updated .
Ingram conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ingram Fire | Ingram Fire – Tactical Channel | 154.1750 | FM | KNFC853 |
Kerr County channels that also cover Ingram
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kerr County Fire | Firecom East | 155.7975 In 151.4975 | 365 DPL | FMN | WQNL894 |
| Kerr County Fire | Firecom West | 156.1800 In 154.3850 | 365 DPL | FMN | WQNL894 |
| Kerr County Fire | Firecom Central | 159.1350 In 154.6500 | 365 DPL | FMN | WQNL894 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Turtle Creek VFD Fire | Turtle Creek Volunteer Fire Department Fire – Tactical Channel / Operations | 154.3250 In 150.7750 | FM | WPKI374 |
Greater Austin/Travis Regional Radio System (GATRRS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Kerr County Fire | Kerr County Fire – Dispatch | 46330 | b4fa | D |
| Kerr County Fire | Fire Operations | 46331 | b4fb | D |
| Kerr County Fire | Fire Operations | 46332 | b4fc | D |
| Kerr County Fire | Fire Operations | 46333 | b4fd | D |
| Kerr County Fire | Fire Operations | 46334 | b4fe | D |
| Kerr County Fire | Fire Operations | 46335 | b4ff | D |
| Kerr County Fire | Fire Operations | 46336 | b500 | D |
| Kerr County Fire | Fire Operations | 46337 | b501 | D |
Nearest trunked radio sites
Distances are measured from the center of Ingram.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Ingram?
We do not have a fire dispatch channel listed specifically for Ingram. The county-level fire dispatch channels in the same county: Kerr County Fire 155.7975 MHz, narrow FM, 365 DPL.
Do fire departments and EMS use a trunked radio system in Ingram?
Yes. The county-level systems that cover Ingram are Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Ingram?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Ingram?
For Ingram, start with the Kerr County site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 155.385, 155.55 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Ingram fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Ingram are marked encrypted.