Skip to content

Comfort Fire and EMS Frequencies

Comfort in Kendall County, Texas has 3 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Kerr County (Greater Austin/Travis Regional Radio System (GATRRS)), about 24 miles away.

About Comfort Fire and EMS Frequencies

Quick answer: Fire dispatch for Comfort: Comfort Fire Dispatch 155.0550 MHz, narrow FM, 162.2 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Comfort conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Comfort
AgencyDescriptionFrequency (MHz)ToneModeFCC
Comfort Fire DispatchComfort Fire Dispatch (when paged by Kerr County)155.0550
In 159.1650
162.2 PLFMNWQET691

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Comfort
AgencyDescriptionFrequency (MHz)ToneModeFCC
Comfort Fire TacticalComfort Fire Tactical154.1300210.7 PLFMNWNDU935
Comfort Fire TacticalComfort Fire Tactical154.1450210.7 PLFMNWNDU935

Kendall County channels that also cover Comfort

Fire Dispatch

Fire Dispatch frequencies for Kendall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kendall County FireFire/EMS Dispatch
Patched to LCRA P25
155.4000
In 150.7900
125 DPLFMNWPIN418

Nearest trunked radio sites

Distances are measured from the center of Comfort.

Kerr County · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 22 (hex 16) · NAC 130 · about 24 mi away
Control 155.385, 155.55
Voice 155.085, 155.235
Stonewall · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 64 (hex 40) · NAC 130 · about 26 mi away
Control 151.0475, 151.49
Voice 159.4725
Northwest Simulcast · Alamo Area Regional Radio System (AARRS)
RFSS 20 · Site 20 (hex 14) · NAC 01E · about 27 mi away
Control 851.075, 852.15, 852.7375, 852.8625, 853.2625, 853.4875, 854.2125, 855.7375, 856.7625, 857.2875, 858.3625, 859.2875, 859.3625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Comfort?

Fire dispatch channels listed for Comfort: Comfort Fire Dispatch 155.0550 MHz, narrow FM, 162.2 PL.

What scanner do I need to listen to fire and EMS in Comfort?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Comfort?

For Comfort, start with the Kerr County site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 155.385, 155.55 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Comfort fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Comfort are marked encrypted.