About Crowell Fire and EMS Frequencies
Quick answer: Fire dispatch for Crowell: Crowell Fire 154.2050 MHz, FM, 136.5 PL. EMS dispatch for Crowell: Crowell EMS 155.8050 MHz, FM, 173.8 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Crowell conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crowell Fire | Crowell Volunteer Fire Department | 154.2050 In 158.7750 | 136.5 PL | FM | WQAK403 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crowell EMS | Crowell / Three Rivers Ambulance | 155.8050 In 158.8950 | 173.8 PL | FM | WQAW332 |
Nearest trunked radio sites
Distances are measured from the center of Crowell.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Crowell?
Fire dispatch channels listed for Crowell: Crowell Fire 154.2050 MHz, FM, 136.5 PL.
What frequency does EMS or the ambulance service use in Crowell?
EMS dispatch channels listed for Crowell: Crowell EMS 155.8050 MHz, FM, 173.8 PL.
What scanner do I need to listen to fire and EMS in Crowell?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Crowell?
For Crowell, start with the Idalou site of Lubbock City-County Mutual Radio System. Its control channels are 856.4875, 857.4875, 858.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Crowell fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Crowell are marked encrypted.