Skip to content

Benjamin Fire and EMS Frequencies

We do not have frequencies listed specifically for Benjamin in Knox County, Texas yet. Countywide channels for Knox County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ransom Canyon (Lubbock City-County Mutual Radio System), about 109 miles away.

About Benjamin Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Benjamin: Knox County Fire 154.1150 MHz, FM, 162.2 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Knox County channels that also cover Benjamin

Fire Dispatch

Fire Dispatch frequencies for Knox County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Knox County FireKnox County Fire – Dispatch154.1150
In 158.8350
162.2 PLFMWPCV637

Nearest trunked radio sites

Distances are measured from the center of Benjamin.

Ransom Canyon · Lubbock City-County Mutual Radio System
RFSS 4 · Site 4 (hex 4) · NAC E · about 109 mi away
Control 856.2375, 857.2375, 858.2375
Idalou · Lubbock City-County Mutual Radio System
RFSS 3 · Site 3 (hex 3) · about 109 mi away
Control 856.4875, 857.4875, 858.4875
Simulcast · Lubbock City-County Mutual Radio System
RFSS 10 · Site 10 (hex A) · NAC 14 · about 117 mi away
Control 854.9875, 855.2375, 855.4875, 855.7375, 856.2125, 856.7125, 856.9875, 857.4625, 857.7375, 858.2125, 858.4375, 858.7125, 858.9875, 859.4875, 859.9875
Voice 856.4625, 857.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Benjamin?

We do not have a fire dispatch channel listed specifically for Benjamin. The county-level fire dispatch channels in the same county: Knox County Fire 154.1150 MHz, FM, 162.2 PL.

What scanner do I need to listen to fire and EMS in Benjamin?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Benjamin?

For Benjamin, start with the Ransom Canyon site of Lubbock City-County Mutual Radio System. Its control channels are 856.2375, 857.2375, 858.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.