Skip to content

Seymour Fire and EMS Frequencies

We do not have frequencies listed specifically for Seymour in Baylor County, Texas yet. Countywide channels for Baylor County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Cool VHF (North Texas Interoperable Radio Network (NTIRN)), about 92 miles away.

About Seymour Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Seymour: Baylor County Fire 155.5350 MHz, narrow FM, 127.3 PL. County-level ems dispatch that covers Seymour: Baylor County EMS 155.5350 MHz, P25, NAC 889.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Baylor County channels that also cover Seymour

Fire Dispatch

Fire Dispatch frequencies for Baylor County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Baylor County FireFire/EMS Alerting155.5350
In 154.8150
127.3 PLFMNWPGB532

EMS Dispatch

EMS Dispatch frequencies for Baylor County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Baylor County EMSSheriff/EMS Dispatch155.5350
In 154.8150
NAC 889P25WPGB532

Nearest trunked radio sites

Distances are measured from the center of Seymour.

Cool VHF · North Texas Interoperable Radio Network (NTIRN)
RFSS 5 · Site 5 (hex 5) · NAC 444 · about 92 mi away
Control 152.81, 155.7225, 158.7825
Voice 152.585
Agnes VHF · North Texas Interoperable Radio Network (NTIRN)
RFSS 5 · Site 4 (hex 4) · NAC 443 · about 95 mi away
Control 152.12, 152.78, 154.25
Voice 152.6, 155.7375
Wise Simulcast · Wise County P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 7B2 · about 96 mi away
Control 151.25, 154.01, 154.2125, 155.265, 155.6325, 155.88
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Seymour?

We do not have a fire dispatch channel listed specifically for Seymour. The county-level fire dispatch channels in the same county: Baylor County Fire 155.5350 MHz, narrow FM, 127.3 PL.

What frequency does EMS or the ambulance service use in Seymour?

We do not have a EMS dispatch channel listed specifically for Seymour. The county-level EMS dispatch channels in the same county: Baylor County EMS 155.5350 MHz, P25, NAC 889.

What scanner do I need to listen to fire and EMS in Seymour?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Seymour?

For Seymour, start with the Cool VHF site of North Texas Interoperable Radio Network (NTIRN). Its control channels are 152.81, 155.7225, 158.7825 MHz. Program a control channel first; the scanner finds the voice channels from it.