Skip to content

Vernon Fire and EMS Frequencies

Vernon in Wilbarger County, Texas has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Wise Simulcast (Wise County P25), about 114 miles away.

About Vernon Fire and EMS Frequencies

Quick answer: Fire dispatch for Vernon: Vernon Fire 154.2200 MHz, narrow FM, 103.5 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Vernon conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Vernon
AgencyDescriptionFrequency (MHz)ToneModeFCC
Vernon FireVernon Fire – Dispatch154.2200
In 153.8900
103.5 PLFMNKNIF218

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Vernon
AgencyDescriptionFrequency (MHz)ToneModeFCC
Vernon FireFire Digital154.3625
In 150.7825
NAC 321P25WPYR655

Nearest trunked radio sites

Distances are measured from the center of Vernon.

Wise Simulcast · Wise County P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 7B2 · about 114 mi away
Control 151.25, 154.01, 154.2125, 155.265, 155.6325, 155.88
Muenster · Denton County Regional Radio System
RFSS 1 · Site 4 (hex 4) · NAC 690 · about 118 mi away
Control 772.68125, 774.49375
Voice 771.25625
Agnes VHF · North Texas Interoperable Radio Network (NTIRN)
RFSS 5 · Site 4 (hex 4) · NAC 443 · about 119 mi away
Control 152.12, 152.78, 154.25
Voice 152.6, 155.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Vernon?

Fire dispatch channels listed for Vernon: Vernon Fire 154.2200 MHz, narrow FM, 103.5 PL.

What scanner do I need to listen to fire and EMS in Vernon?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Vernon?

For Vernon, start with the Wise Simulcast site of Wise County P25. Its control channels are 151.25, 154.01, 154.2125, 155.265 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Vernon fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Vernon are marked encrypted.