About Cherokee County Fire and EMS Frequencies
Quick answer: Fire dispatch for Cherokee County: Cherokee County Fire 154.3100 MHz, narrow FM, 136.5 PL; Lake Palestine East Fire 154.3400 MHz, narrow FM, 136.5 PL. EMS dispatch for Cherokee County: Cherokee County EMS 461.1750 MHz, narrow FM, 306 DPL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Cherokee County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cherokee County Fire | Cherokee County Fire – Dispatch | 154.3100 In 153.9500 | 136.5 PL | FMN | KNEZ469 |
| Lake Palestine East Fire | Lake Palestine East Fire – Dispatch | 154.3400 In 150.8050 | 136.5 PL | FMN | WNUL558 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cherokee County Fire | Repeater | 151.4300 In 156.0750 | 365 DPL | FMN | WQJW912 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cherokee County EMS | Christus EMS Mt. Selman Repeater | 461.1750 In 466.1750 | 306 DPL | FMN | WPPC598 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rusk State Hospital | Operations | 155.0850 In 155.7150 | 136.5 PL | FMN | KAW828 |
Radio system sites in Cherokee County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Cherokee County
- Afton Grove
- Alto
- Atoy
- Blackjack
- Bullard
- Church Hill
- Concord
- Corine
- Cove Springs
- Craft
- Cuney
- Delmer
- Dialville
- Earles Chapel
- Forest
- Frys Gap
- Gallatin
- Gould
- Ironton
- Jacksonville
- Lakeview
- Larissa
- Linwood
- Maydelle
- Mixon
- Mount Selman
- New Hope
- New Summerfield
- Oakland
- Pierces Chapel
- Pine Hill
- Ponta
- Reese
- Reklaw
- Rusk
- Salem
- Shady Grove
- Shadybrook
- Tecula
- Troup
- Turney
- Weeping Mary
- Wells
- Woodville
Common questions
What frequency does the fire department use in Cherokee County?
Fire dispatch channels listed for Cherokee County: Cherokee County Fire 154.3100 MHz, narrow FM, 136.5 PL; Lake Palestine East Fire 154.3400 MHz, narrow FM, 136.5 PL.
What frequency does EMS or the ambulance service use in Cherokee County?
EMS dispatch channels listed for Cherokee County: Cherokee County EMS 461.1750 MHz, narrow FM, 306 DPL.
What scanner do I need to listen to fire and EMS in Cherokee County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Cherokee County?
For Cherokee County, start with the Rusk site of Texas Wide Area Radio Network (TxWARN). Its control channels are 855.7125, 857.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cherokee County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Cherokee County are marked encrypted.