About Jacksonville Fire and EMS Frequencies
Quick answer: Fire dispatch for Jacksonville: Jacksonville Fire 154.1750 MHz, narrow FM, 411 DPL. County-level ems dispatch that covers Jacksonville: Cherokee County EMS 461.1750 MHz, narrow FM, 306 DPL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Jacksonville conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jacksonville Fire | Jacksonville Fire – Dispatch | 154.1750 In 154.8375 | 411 DPL | FMN | KNIS323 |
Cherokee County channels that also cover Jacksonville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cherokee County Fire | Cherokee County Fire – Dispatch | 154.3100 In 153.9500 | 136.5 PL | FMN | KNEZ469 |
| Lake Palestine East Fire | Lake Palestine East Fire – Dispatch | 154.3400 In 150.8050 | 136.5 PL | FMN | WNUL558 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cherokee County Fire | Repeater | 151.4300 In 156.0750 | 365 DPL | FMN | WQJW912 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cherokee County EMS | Christus EMS Mt. Selman Repeater | 461.1750 In 466.1750 | 306 DPL | FMN | WPPC598 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rusk State Hospital | Operations | 155.0850 In 155.7150 | 136.5 PL | FMN | KAW828 |
Nearest trunked radio sites
Distances are measured from the center of Jacksonville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Jacksonville?
Fire dispatch channels listed for Jacksonville: Jacksonville Fire 154.1750 MHz, narrow FM, 411 DPL.
What frequency does EMS or the ambulance service use in Jacksonville?
We do not have a EMS dispatch channel listed specifically for Jacksonville. The county-level EMS dispatch channels in the same county: Cherokee County EMS 461.1750 MHz, narrow FM, 306 DPL.
What scanner do I need to listen to fire and EMS in Jacksonville?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Jacksonville?
For Jacksonville, start with the Rusk site of Texas Wide Area Radio Network (TxWARN). Its control channels are 855.7125, 857.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Jacksonville fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Jacksonville are marked encrypted.