Skip to content

Troup Fire and EMS Frequencies

We do not have frequencies listed specifically for Troup in Cherokee County, Texas yet. Countywide channels for Cherokee County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Arp (Texas Wide Area Radio Network (TxWARN)), about 8 miles away.

About Troup Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Troup: Cherokee County Fire 154.3100 MHz, narrow FM, 136.5 PL; Lake Palestine East Fire 154.3400 MHz, narrow FM, 136.5 PL. County-level ems dispatch that covers Troup: Cherokee County EMS 461.1750 MHz, narrow FM, 306 DPL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Cherokee County channels that also cover Troup

Fire Dispatch

Fire Dispatch frequencies for Cherokee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cherokee County FireCherokee County Fire – Dispatch154.3100
In 153.9500
136.5 PLFMNKNEZ469
Lake Palestine East FireLake Palestine East Fire – Dispatch154.3400
In 150.8050
136.5 PLFMNWNUL558

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cherokee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cherokee County FireRepeater151.4300
In 156.0750
365 DPLFMNWQJW912

EMS Dispatch

EMS Dispatch frequencies for Cherokee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cherokee County EMSChristus EMS Mt. Selman Repeater461.1750
In 466.1750
306 DPLFMNWPPC598

Hospitals & Medical

Hospitals & Medical frequencies for Cherokee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rusk State HospitalOperations155.0850
In 155.7150
136.5 PLFMNKAW828

Nearest trunked radio sites

Distances are measured from the center of Troup.

Arp · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 39 (hex 27) · NAC 1A9 · about 8 mi away
Control 771.03125, 771.53125
Voice 769.28125, 769.53125, 769.78125, 770.08125, 770.50625, 770.78125
Bullard · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 40 (hex 28) · about 12 mi away
Control 853.325, 855.4625
Voice 851.2625, 851.55, 851.975, 852.2625, 852.6, 853.05
Tyler Simulcast · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 41 (hex 29) · NAC 1A0 · about 18 mi away
Control 858.2125, 859.2125
Voice 851.05, 851.375, 851.575, 851.775, 852.0375, 852.45, 852.9, 853.075, 853.1, 853.2125, 854.9875, 856.2125, 857.5875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Troup?

We do not have a fire dispatch channel listed specifically for Troup. The county-level fire dispatch channels in the same county: Cherokee County Fire 154.3100 MHz, narrow FM, 136.5 PL; Lake Palestine East Fire 154.3400 MHz, narrow FM, 136.5 PL.

What frequency does EMS or the ambulance service use in Troup?

We do not have a EMS dispatch channel listed specifically for Troup. The county-level EMS dispatch channels in the same county: Cherokee County EMS 461.1750 MHz, narrow FM, 306 DPL.

What scanner do I need to listen to fire and EMS in Troup?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Troup?

For Troup, start with the Arp site of Texas Wide Area Radio Network (TxWARN). Its control channels are 771.03125, 771.53125 MHz. Program a control channel first; the scanner finds the voice channels from it.