About Cherokee County Police Frequencies
Quick answer: Dispatch for Cherokee County: Cherokee County Sheriff 155.1300 MHz, P25, NAC 1CF.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Cherokee County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cherokee County Sheriff | Sheriff 1 Dispatch | 155.1300 In 154.6500 | NAC 1CF | P25 | KUQ553 |
| Cherokee County Sheriff | Sheriff 1 Dispatch (Analog) | 155.1300 In 154.6500 | 136.5 PL | FMN | KUQ553 |
| Cherokee County Sheriff | North Repeater Patched to 155.1300 | 155.2425 In 158.7300 | NAC 1CF | P25 | WQJW911 |
| Cherokee County Sheriff | North Repeater Patched to 155.1300 | 155.2425 In 158.7300 | 365 DPL | FMN | WQJW911 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cherokee County Sheriff | Sheriff 2 License/Weights and Commissioners Road Crews | 155.9400 In 158.9250 | 85.4 PL | FMN | WNPR831 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cherokee County Jail | Jail | 154.3250 | FMN | 154.325 |
Radio system sites in Cherokee County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Cherokee County
- Afton Grove
- Alto
- Atoy
- Blackjack
- Bullard
- Church Hill
- Concord
- Corine
- Cove Springs
- Craft
- Cuney
- Delmer
- Dialville
- Earles Chapel
- Forest
- Frys Gap
- Gallatin
- Gould
- Ironton
- Jacksonville
- Lakeview
- Larissa
- Linwood
- Maydelle
- Mixon
- Mount Selman
- New Hope
- New Summerfield
- Oakland
- Pierces Chapel
- Pine Hill
- Ponta
- Reese
- Reklaw
- Rusk
- Salem
- Shady Grove
- Shadybrook
- Tecula
- Troup
- Turney
- Weeping Mary
- Wells
- Woodville
Common questions
What frequency do the police use in Cherokee County?
Dispatch channels listed for Cherokee County: Cherokee County Sheriff 155.1300 MHz, P25, NAC 1CF.
What is the sheriff's dispatch frequency in Cherokee County?
Cherokee County Sheriff 155.1300 MHz, P25, NAC 1CF.
What scanner do I need to listen to police in Cherokee County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Cherokee County?
For Cherokee County, start with the Rusk site of Texas Wide Area Radio Network (TxWARN). Its control channels are 855.7125, 857.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cherokee County police frequencies encrypted?
None of the 6 conventional frequencies listed for Cherokee County are marked encrypted.