Skip to content

Stephens County Fire and EMS Frequencies

Stephens County in Oklahoma has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 15 cities and communities below for local fire departments and EMS agencies.

About Stephens County Fire and EMS Frequencies

Quick answer: Fire dispatch for Stephens County: Doyle Fire 155.9400 MHz, narrow FM, 114 DPL; Oak Ridge Fire 154.1300 MHz, narrow FM, 156.7 PL. EMS dispatch for Stephens County: Air Evac Medical Helicopters 160.0800 MHz, narrow FM, 114 DPL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Stephens County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Stephens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Doyle FireDoyle Fire – Dispatch155.9400
In 159.0750
114 DPLFMNWQDM315
Oak Ridge FireOak Ridge Fire – State Fire Net154.1300156.7 PLFMN—

EMS Dispatch

EMS Dispatch frequencies for Stephens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Air Evac Medical HelicoptersAir Evac – Duncan Base160.0800114 DPLFMNWQRZ623

Radio system sites in Stephens County

Program the control channel first; your scanner finds the voice channels from it.

Velma · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 68 (hex 44) · NAC 92B
Control 859.0375, 859.5375
Voice 856.0875, 856.5375, 857.0375, 857.5375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Stephens County

Common questions

What frequency does the fire department use in Stephens County?

Fire dispatch channels listed for Stephens County: Doyle Fire 155.9400 MHz, narrow FM, 114 DPL; Oak Ridge Fire 154.1300 MHz, narrow FM, 156.7 PL.

What frequency does EMS or the ambulance service use in Stephens County?

EMS dispatch channels listed for Stephens County: Air Evac Medical Helicopters 160.0800 MHz, narrow FM, 114 DPL.

What scanner do I need to listen to fire and EMS in Stephens County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Stephens County?

For Stephens County, start with the Velma site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.0375, 859.5375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Stephens County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Stephens County are marked encrypted.