Skip to content

Velma Fire and EMS Frequencies

Velma in Stephens County, Oklahoma has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Velma (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 2 miles away.

About Velma Fire and EMS Frequencies

Quick answer: Fire dispatch for Velma: Velma Fire 154.3700 MHz, DMR, CC 8 · TG 2500 · SL 1. County-level ems dispatch that covers Velma: Air Evac Medical Helicopters 160.0800 MHz, narrow FM, 114 DPL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Velma conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Velma
AgencyDescriptionFrequency (MHz)ToneModeFCC
Velma FireVelma Fire – Dispatch154.3700
In 150.7750
CC 8 · TG 2500 · SL 1DMRWNYA401

Stephens County channels that also cover Velma

Fire Dispatch

Fire Dispatch frequencies for Stephens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Doyle FireDoyle Fire – Dispatch155.9400
In 159.0750
114 DPLFMNWQDM315
Oak Ridge FireOak Ridge Fire – State Fire Net154.1300156.7 PLFMN—

EMS Dispatch

EMS Dispatch frequencies for Stephens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Air Evac Medical HelicoptersAir Evac – Duncan Base160.0800114 DPLFMNWQRZ623

Nearest trunked radio sites

Distances are measured from the center of Velma.

Velma · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 68 (hex 44) · NAC 92B · about 2 mi away
Control 859.0375, 859.5375
Voice 856.0875, 856.5375, 857.0375, 857.5375
Arbuckle Mountain · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 20 (hex 14) · NAC 92B · about 29 mi away
Control 859.4875, 860.4875
Voice 856.4875, 857.4875, 858.4875
Ardmore · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 38 (hex 26) · NAC 92B · about 34 mi away
Control 859.9875, 860.9875
Voice 856.9875, 857.9875, 858.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Velma?

Fire dispatch channels listed for Velma: Velma Fire 154.3700 MHz, DMR, CC 8 · TG 2500 · SL 1.

What frequency does EMS or the ambulance service use in Velma?

We do not have a EMS dispatch channel listed specifically for Velma. The county-level EMS dispatch channels in the same county: Air Evac Medical Helicopters 160.0800 MHz, narrow FM, 114 DPL.

What scanner do I need to listen to fire and EMS in Velma?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Velma?

For Velma, start with the Velma site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.0375, 859.5375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Velma fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Velma are marked encrypted.