Skip to content

Comanche Fire and EMS Frequencies

Comanche in Stephens County, Oklahoma has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Velma (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 17 miles away.

About Comanche Fire and EMS Frequencies

Quick answer: Fire dispatch for Comanche: Comanche Fire 154.0400 MHz, narrow FM, 91.5 PL. County-level ems dispatch that covers Comanche: Air Evac Medical Helicopters 160.0800 MHz, narrow FM, 114 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Comanche conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Comanche
AgencyDescriptionFrequency (MHz)ToneModeFCC
Comanche FireFire and other City Services154.0400
In 159.0450
91.5 PLFMNWNZQ770

Stephens County channels that also cover Comanche

Fire Dispatch

Fire Dispatch frequencies for Stephens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Doyle FireDoyle Fire – Dispatch155.9400
In 159.0750
114 DPLFMNWQDM315
Oak Ridge FireOak Ridge Fire – State Fire Net154.1300156.7 PLFMN—

EMS Dispatch

EMS Dispatch frequencies for Stephens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Air Evac Medical HelicoptersAir Evac – Duncan Base160.0800114 DPLFMNWQRZ623

Nearest trunked radio sites

Distances are measured from the center of Comanche.

Velma · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 68 (hex 44) · NAC 92B · about 17 mi away
Control 859.0375, 859.5375
Voice 856.0875, 856.5375, 857.0375, 857.5375
Walters · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 30 (hex 1E) · NAC 92A · about 19 mi away
Control 859.7375, 860.7375
Voice 856.7375, 857.7375, 858.7375
Lawton · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 3 (hex 3) · NAC 92A · about 29 mi away
Control 857.7125, 858.7125, 859.7125, 860.7125
Voice 851.2375, 851.4875, 853.2875, 853.5125, 853.5375, 853.7875, 856.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Comanche?

Fire dispatch channels listed for Comanche: Comanche Fire 154.0400 MHz, narrow FM, 91.5 PL.

What frequency does EMS or the ambulance service use in Comanche?

We do not have a EMS dispatch channel listed specifically for Comanche. The county-level EMS dispatch channels in the same county: Air Evac Medical Helicopters 160.0800 MHz, narrow FM, 114 DPL.

What scanner do I need to listen to fire and EMS in Comanche?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Comanche?

For Comanche, start with the Velma site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.0375, 859.5375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Comanche fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Comanche are marked encrypted.