About Duncan Fire and EMS Frequencies
Quick answer: Fire dispatch for Duncan: Duncan Fire 155.0925 MHz, DMR, CC 6 · TG 7100 · SL 1. County-level ems dispatch that covers Duncan: Air Evac Medical Helicopters 160.0800 MHz, narrow FM, 114 DPL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Duncan conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Duncan Fire | Fire and EMS Dispatch | 155.0925 In 150.7900 | CC 6 · TG 7100 · SL 1 | DMR | WQBA733 |
Stephens County channels that also cover Duncan
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Doyle Fire | Doyle Fire – Dispatch | 155.9400 In 159.0750 | 114 DPL | FMN | WQDM315 |
| Oak Ridge Fire | Oak Ridge Fire – State Fire Net | 154.1300 | 156.7 PL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Air Evac Medical Helicopters | Air Evac – Duncan Base | 160.0800 | 114 DPL | FMN | WQRZ623 |
Nearest trunked radio sites
Distances are measured from the center of Duncan.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Duncan?
Fire dispatch channels listed for Duncan: Duncan Fire 155.0925 MHz, DMR, CC 6 · TG 7100 · SL 1.
What frequency does EMS or the ambulance service use in Duncan?
We do not have a EMS dispatch channel listed specifically for Duncan. The county-level EMS dispatch channels in the same county: Air Evac Medical Helicopters 160.0800 MHz, narrow FM, 114 DPL.
What scanner do I need to listen to fire and EMS in Duncan?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Duncan?
For Duncan, start with the Velma site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.0375, 859.5375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Duncan fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Duncan are marked encrypted.