Skip to content

Sequoyah County Fire and EMS Frequencies

Sequoyah County in Oklahoma has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 35 cities and communities below for local fire departments and EMS agencies.

About Sequoyah County Fire and EMS Frequencies

Quick answer: Fire dispatch for Sequoyah County: Sequoyah County Fire 158.7300 MHz, narrow FM, 114.8 PL. EMS dispatch for Sequoyah County: Sequoyah County EMS 152.4200 MHz, narrow FM, 712 DPL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Sequoyah County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Sequoyah County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sequoyah County FireFire and EMS Dispatch158.7300
In 153.9800
114.8 PLFMNWPNS527

EMS Dispatch

EMS Dispatch frequencies for Sequoyah County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sequoyah County EMSPafford EMS Dispatch152.4200
In 157.6800
712 DPLFMNWQGK648

Radio system sites in Sequoyah County

Program the control channel first; your scanner finds the voice channels from it.

Gore · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 52 (hex 34) · NAC 92E
Control 859.2625, 860.2625
Voice 855.9625, 856.2625, 857.2625, 858.2625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Sequoyah County

Common questions

What frequency does the fire department use in Sequoyah County?

Fire dispatch channels listed for Sequoyah County: Sequoyah County Fire 158.7300 MHz, narrow FM, 114.8 PL.

What frequency does EMS or the ambulance service use in Sequoyah County?

EMS dispatch channels listed for Sequoyah County: Sequoyah County EMS 152.4200 MHz, narrow FM, 712 DPL.

What scanner do I need to listen to fire and EMS in Sequoyah County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sequoyah County?

For Sequoyah County, start with the Gore site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2625, 860.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sequoyah County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Sequoyah County are marked encrypted.