About Muldrow Fire and EMS Frequencies
Quick answer: Fire dispatch for Muldrow: Muldrow Fire 155.9250 MHz, narrow FM, 173.8 PL. EMS dispatch for Muldrow: Muldrow EMS 153.5150 MHz, narrow FM, 712 DPL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Muldrow conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Muldrow Fire | Muldrow Fire – Dispatch | 155.9250 | 173.8 PL | FMN | KZR524 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Muldrow EMS | Pafford EMS Dispatch | 153.5150 In 158.2725 | 712 DPL | FMN | WQVE599 |
Sequoyah County channels that also cover Muldrow
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sequoyah County Fire | Fire and EMS Dispatch | 158.7300 In 153.9800 | 114.8 PL | FMN | WPNS527 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sequoyah County EMS | Pafford EMS Dispatch | 152.4200 In 157.6800 | 712 DPL | FMN | WQGK648 |
Nearest trunked radio sites
Distances are measured from the center of Muldrow.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Muldrow?
Fire dispatch channels listed for Muldrow: Muldrow Fire 155.9250 MHz, narrow FM, 173.8 PL.
What frequency does EMS or the ambulance service use in Muldrow?
EMS dispatch channels listed for Muldrow: Muldrow EMS 153.5150 MHz, narrow FM, 712 DPL.
What scanner do I need to listen to fire and EMS in Muldrow?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Muldrow?
For Muldrow, start with the Cookson site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 853.0375, 853.9 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Muldrow fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Muldrow are marked encrypted.