About Roland Fire and EMS Frequencies
Quick answer: Fire dispatch for Roland: Roland Fire 154.9800 MHz, narrow FM, no tone. County-level ems dispatch that covers Roland: Sequoyah County EMS 152.4200 MHz, narrow FM, 712 DPL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Roland conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Roland Fire | Liberty Fire Dispatch | 154.9800 In 150.8050 | FMN | WQAF436 |
Sequoyah County channels that also cover Roland
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sequoyah County Fire | Fire and EMS Dispatch | 158.7300 In 153.9800 | 114.8 PL | FMN | WPNS527 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sequoyah County EMS | Pafford EMS Dispatch | 152.4200 In 157.6800 | 712 DPL | FMN | WQGK648 |
Nearest trunked radio sites
Distances are measured from the center of Roland.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Roland?
Fire dispatch channels listed for Roland: Roland Fire 154.9800 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Roland?
We do not have a EMS dispatch channel listed specifically for Roland. The county-level EMS dispatch channels in the same county: Sequoyah County EMS 152.4200 MHz, narrow FM, 712 DPL.
What scanner do I need to listen to fire and EMS in Roland?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Roland?
For Roland, start with the Cookson site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 853.0375, 853.9 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Roland fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Roland are marked encrypted.