Skip to content

Gore Fire and EMS Frequencies

Gore in Sequoyah County, Oklahoma has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Gore (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 3 miles away.

About Gore Fire and EMS Frequencies

Quick answer: Fire dispatch for Gore: Gore Fire 154.7550 MHz, narrow FM, no tone. County-level ems dispatch that covers Gore: Sequoyah County EMS 152.4200 MHz, narrow FM, 712 DPL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Gore conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Gore
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gore FireGore Fire – Dispatch154.7550FMNWPNS527

Sequoyah County channels that also cover Gore

Fire Dispatch

Fire Dispatch frequencies for Sequoyah County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sequoyah County FireFire and EMS Dispatch158.7300
In 153.9800
114.8 PLFMNWPNS527

EMS Dispatch

EMS Dispatch frequencies for Sequoyah County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sequoyah County EMSPafford EMS Dispatch152.4200
In 157.6800
712 DPLFMNWQGK648

Nearest trunked radio sites

Distances are measured from the center of Gore.

Gore · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 52 (hex 34) · NAC 92E · about 3 mi away
Control 859.2625, 860.2625
Voice 855.9625, 856.2625, 857.2625, 858.2625
Muskogee County · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 53 (hex 35) · NAC 92D · about 14 mi away
Control 852.225, 852.4
Voice 851.15, 851.45, 853.225, 853.5875, 853.8375
Cookson · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 47 (hex 2F) · NAC 92D · about 19 mi away
Control 853.0375, 853.9
Voice 851.0875, 852.275, 852.55, 852.725, 852.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Gore?

Fire dispatch channels listed for Gore: Gore Fire 154.7550 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Gore?

We do not have a EMS dispatch channel listed specifically for Gore. The county-level EMS dispatch channels in the same county: Sequoyah County EMS 152.4200 MHz, narrow FM, 712 DPL.

What scanner do I need to listen to fire and EMS in Gore?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Gore?

For Gore, start with the Gore site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2625, 860.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Gore fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Gore are marked encrypted.