Skip to content

Grady County Fire and EMS Frequencies

Grady County in Oklahoma has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 16 cities and communities below for local fire departments and EMS agencies.

About Grady County Fire and EMS Frequencies

Quick answer: Fire dispatch for Grady County: Grady County Fire 154.8150 MHz, narrow FM, 118.8 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Grady County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Grady County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grady County FireRural Fire / Emergency Management154.8150
In 159.1500
118.8 PLFMNKNDK514

Radio system sites in Grady County

Program the control channel first; your scanner finds the voice channels from it.

Chickasha · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 18 (hex 12) · NAC 92E
Control 859.2125, 860.2125
Voice 852.6875, 854.0125, 856.2125, 857.2125, 858.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Grady County

Common questions

What frequency does the fire department use in Grady County?

Fire dispatch channels listed for Grady County: Grady County Fire 154.8150 MHz, narrow FM, 118.8 PL.

What scanner do I need to listen to fire and EMS in Grady County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Grady County?

For Grady County, start with the Chickasha site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2125, 860.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Grady County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Grady County are marked encrypted.