Skip to content

Amber Fire and EMS Frequencies

We do not have frequencies listed specifically for Amber in Grady County, Oklahoma yet. Countywide channels for Grady County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Chickasha (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 8 miles away.

About Amber Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Amber: Grady County Fire 154.8150 MHz, narrow FM, 118.8 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Grady County channels that also cover Amber

Fire Dispatch

Fire Dispatch frequencies for Grady County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grady County FireRural Fire / Emergency Management154.8150
In 159.1500
118.8 PLFMNKNDK514

Nearest trunked radio sites

Distances are measured from the center of Amber.

Chickasha · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 18 (hex 12) · NAC 92E · about 8 mi away
Control 859.2125, 860.2125
Voice 852.6875, 854.0125, 856.2125, 857.2125, 858.2125
Dibble · Oklahoma Multi-Agency Communications System (OMACS)
RFSS 1 · Site 7 (hex 7) · NAC 196 · about 19 mi away
Control 771.19375, 771.44375
Voice 771.79375, 772.26875, 772.51875
Anadarko · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 45 (hex 2D) · NAC 92A · about 21 mi away
Control 853.5875, 853.85
Voice 851.45, 852.225, 852.4, 853.225
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Amber?

We do not have a fire dispatch channel listed specifically for Amber. The county-level fire dispatch channels in the same county: Grady County Fire 154.8150 MHz, narrow FM, 118.8 PL.

What scanner do I need to listen to fire and EMS in Amber?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Amber?

For Amber, start with the Chickasha site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2125, 860.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.