Skip to content

Tuttle Fire and EMS Frequencies

Tuttle in Grady County, Oklahoma has 3 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Downtown OKC (Oklahoma Multi-Agency Communications System (OMACS)), about 18 miles away.

About Tuttle Fire and EMS Frequencies

Quick answer: Fire dispatch for Tuttle: Tuttle Fire 153.7475 MHz, DMR, CC 8 · TG 26433 · SL 1.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Tuttle conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Tuttle
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tuttle FireFire 1 Main153.7475
In 158.7825
CC 8 · TG 26433 · SL 1DMRWPTE483
Tuttle FireFire and EMS Tone Out154.4000
In 150.7900
118.8 PLFMNWPCH475

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Tuttle
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tuttle FireTuttle Fire – Tactical Channel155.7375DMRWPTE483

Grady County channels that also cover Tuttle

Fire Dispatch

Fire Dispatch frequencies for Grady County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grady County FireRural Fire / Emergency Management154.8150
In 159.1500
118.8 PLFMNKNDK514

Nearest trunked radio sites

Distances are measured from the center of Tuttle.

Downtown OKC · Oklahoma Multi-Agency Communications System (OMACS)
RFSS 1 · Site 1 (hex 1) · NAC 196 · about 18 mi away
Control 856.7875, 857.7875
Voice 855.7875, 858.7875, 859.7875
Norman · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 41 (hex 29) · NAC 92C · about 19 mi away
Control 859.9875, 860.9875
Voice 852.775, 854.9875, 856.9875, 857.9875, 858.9875
Chickasha · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 18 (hex 12) · NAC 92E · about 20 mi away
Control 859.2125, 860.2125
Voice 852.6875, 854.0125, 856.2125, 857.2125, 858.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Tuttle?

Fire dispatch channels listed for Tuttle: Tuttle Fire 153.7475 MHz, DMR, CC 8 · TG 26433 · SL 1.

What scanner do I need to listen to fire and EMS in Tuttle?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Tuttle?

For Tuttle, start with the Downtown OKC site of Oklahoma Multi-Agency Communications System (OMACS). Its control channels are 856.7875, 857.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Tuttle fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Tuttle are marked encrypted.