About Middleberg Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Middleberg: Grady County Fire 154.8150 MHz, narrow FM, 118.8 PL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Data updated .
Grady County channels that also cover Middleberg
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grady County Fire | Rural Fire / Emergency Management | 154.8150 In 159.1500 | 118.8 PL | FMN | KNDK514 |
Nearest trunked radio sites
Distances are measured from the center of Middleberg.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Middleberg?
We do not have a fire dispatch channel listed specifically for Middleberg. The county-level fire dispatch channels in the same county: Grady County Fire 154.8150 MHz, narrow FM, 118.8 PL.
What scanner do I need to listen to fire and EMS in Middleberg?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Middleberg?
For Middleberg, start with the Chickasha site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2125, 860.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.