Skip to content

Custer County Fire and EMS Frequencies

Custer County in Oklahoma has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Custer County Fire and EMS Frequencies

Quick answer: Fire dispatch for Custer County: Custer County Fire 154.1300 MHz, DMR, CC 7 · TG 500 · SL 1. EMS dispatch for Custer County: Air Evac Medical Helicopters 159.7725 MHz, narrow FM, 114 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Custer County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Custer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Custer County FireCounty Fire154.1300CC 7 · TG 500 · SL 1DMR—

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Custer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Custer County FireCounty Fire Task Force154.3700047 DPLFMNWPSI992
Custer County FireCounty Fire Task Force154.4300136.5 PLFMNKNNT316
Custer County FireCounty Fire Task Force155.3850110.9 PLFMNKNHD643

EMS Dispatch

EMS Dispatch frequencies for Custer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Air Evac Medical HelicoptersAir Evac -- Weatherford Base159.7725114 DPLFMNWQVD795

Radio system sites in Custer County

Program the control channel first; your scanner finds the voice channels from it.

Weatherford · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 44 (hex 2C) · NAC 929
Control 859.9875, 860.9875
Voice 855.9875, 856.9875, 857.9875, 858.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Custer County

Common questions

What frequency does the fire department use in Custer County?

Fire dispatch channels listed for Custer County: Custer County Fire 154.1300 MHz, DMR, CC 7 · TG 500 · SL 1.

What frequency does EMS or the ambulance service use in Custer County?

EMS dispatch channels listed for Custer County: Air Evac Medical Helicopters 159.7725 MHz, narrow FM, 114 DPL.

What scanner do I need to listen to fire and EMS in Custer County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Custer County?

For Custer County, start with the Weatherford site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.9875, 860.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Custer County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Custer County are marked encrypted.