Skip to content

Hamilton County Fire and EMS Frequencies

Hamilton County in Iowa has 3 countywide conventional frequencies and 8 countywide talkgroups in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Hamilton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Hamilton County: Hamilton County Fire 154.2350 MHz, narrow FM, no tone. EMS dispatch for Hamilton County: Hamilton County Hospital 155.3400 MHz, FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Hamilton County Fire talkgroup 31008 (hex 7920).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hamilton County, start with the Hamilton Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 774.79375 MHz.

Data updated .

Hamilton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County FireHamilton County Fire – Dispatch154.2350
In 159.0450
FMNWQGS402

EMS Dispatch

EMS Dispatch frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County HospitalHamilton County Hospital – Dispatch (167.9PL on Base side)155.3400CSQFMKQS751

Hospitals & Medical

Hospitals & Medical frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County HospitalHamilton County Hospital – Paging155.8650CSQFMWSL644

Hamilton County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Hamilton County FireHamilton County Fire – Dispatch310087920T
Hamilton County FireFire/EMS Roam310177929T
Hamilton County FireJewell Fire Page31034793aT
Hamilton County FireDispatch VHF Patch310457945T
Hamilton Webster City FireHamilton Webster City Fire – Dispatch310407940T
Hamilton County FireCounty Fire31006791eT
Hamilton County EMSEMS Operations31018792aT
Hamilton County EMSVan Diest EMS Dispatch310427942T

Radio system sites in Hamilton County

Program the control channel first; your scanner finds the voice channels from it.

Hamilton Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 40 (hex 28) · NAC 4C0
Control 774.79375
Voice 770.66875, 770.91875, 774.54375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Hamilton County

Common questions

What frequency does the fire department use in Hamilton County?

Fire dispatch channels listed for Hamilton County: Hamilton County Fire 154.2350 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Hamilton County?

EMS dispatch channels listed for Hamilton County: Hamilton County Hospital 155.3400 MHz, FM, CSQ.

Do fire departments and EMS use a trunked radio system in Hamilton County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Hamilton County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Hamilton County?

For Hamilton County, start with the Hamilton Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 774.79375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hamilton County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Hamilton County are marked encrypted.

Are Hamilton County fire and EMS talkgroups encrypted?

None of the 8 talkgroups listed for Hamilton County are marked encrypted.