Skip to content

Stanhope Fire and EMS Frequencies

Stanhope in Hamilton County, Iowa has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Hamilton Co Simulcast (Iowa Statewide Interoperable Communications System (ISICS)), about 8 miles away.

About Stanhope Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Stanhope: Hamilton County Fire 154.2350 MHz, narrow FM, no tone. County-level ems dispatch that covers Stanhope: Hamilton County Hospital 155.3400 MHz, FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Stanhope Fire talkgroup 31037 (hex 793d).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup; Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Stanhope, start with the Hamilton Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS), about 8 miles away. Its control channels: 774.79375 MHz.

Data updated .

Stanhope trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Stanhope FireStanhope Fire Page31037793dT

Hamilton County channels that also cover Stanhope

Fire Dispatch

Fire Dispatch frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County FireHamilton County Fire – Dispatch154.2350
In 159.0450
FMNWQGS402

EMS Dispatch

EMS Dispatch frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County HospitalHamilton County Hospital – Dispatch (167.9PL on Base side)155.3400CSQFMKQS751

Hospitals & Medical

Hospitals & Medical frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County HospitalHamilton County Hospital – Paging155.8650CSQFMWSL644

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Hamilton County FireHamilton County Fire – Dispatch310087920T
Hamilton County FireFire/EMS Roam310177929T
Hamilton County FireJewell Fire Page31034793aT
Hamilton County FireDispatch VHF Patch310457945T
Hamilton Webster City FireHamilton Webster City Fire – Dispatch310407940T
Hamilton County FireCounty Fire31006791eT
Hamilton County EMSEMS Operations31018792aT
Hamilton County EMSVan Diest EMS Dispatch310427942T

Nearest trunked radio sites

Distances are measured from the center of Stanhope.

Hamilton Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 40 (hex 28) · NAC 4C0 · about 8 mi away
Control 774.79375
Voice 770.66875, 770.91875, 774.54375
Mackey · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 108 (hex 6C) · NAC 4C0 · about 8 mi away
Control 770.71875, 770.96875, 774.59375, 774.84375
Lehigh · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 150 (hex 96) · NAC 4C7 · about 14 mi away
Control 774.19375, 774.38125, 774.89375
Voice 773.95625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Stanhope?

We do not have a fire dispatch channel listed specifically for Stanhope. The county-level fire dispatch channels in the same county: Hamilton County Fire 154.2350 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Stanhope?

We do not have a EMS dispatch channel listed specifically for Stanhope. The county-level EMS dispatch channels in the same county: Hamilton County Hospital 155.3400 MHz, FM, CSQ.

Do fire departments and EMS use a trunked radio system in Stanhope?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Stanhope?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Stanhope?

For Stanhope, start with the Hamilton Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 774.79375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Stanhope fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Stanhope are marked encrypted.