Skip to content

Maxeys Fire and EMS Frequencies

We do not have frequencies listed specifically for Maxeys in Oglethorpe County, Georgia yet. Countywide channels for Oglethorpe County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Greene/Oconee Co. Simulcast (Oconee Areawide Radio System (OARS)), about 9 miles away.

About Maxeys Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Maxeys: Oglethorpe County Fire 153.8300 MHz, narrow FM, no tone. County-level ems dispatch that covers Maxeys: Oglethorpe County EMS 151.0625 MHz, DMR, CC 12 · TG 4 · SL 1.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Oglethorpe County channels that also cover Maxeys

Fire Dispatch

Fire Dispatch frequencies for Oglethorpe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Oglethorpe County FireGeorgia State Patrol Post 17153.8300FMNWQRQ772
Oglethorpe County FireOglethorpe County Fire – Dispatch154.1300
In 156.1875
179.9 PLFMNWPWK987

EMS Dispatch

EMS Dispatch frequencies for Oglethorpe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Oglethorpe County EMSOglethorpe County EMS – Dispatch151.0625
In 154.8825
CC 12 · TG 4 · SL 1DMRWPZX976

Nearest trunked radio sites

Distances are measured from the center of Maxeys.

Greene/Oconee Co. Simulcast · Oconee Areawide Radio System (OARS)
RFSS 7 · Site 2 (hex 2) · NAC 290 · about 9 mi away
Control 769.83125, 770.00625, 771.03125
Voice 770.33125, 771.18125, 771.65625, 771.75625, 771.95625, 772.35625, 774.43125
Simulcast · Clarke County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 6F1 · about 18 mi away
Control 852.475, 853.8125, 857.7625
Voice 851.05, 851.4375, 851.825, 856.7625, 857.4375, 857.9375
Madison · Morgan County
Site 1 (hex 1) · about 20 mi away
Voice 152.1575, 152.5775, 152.7275
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Maxeys?

We do not have a fire dispatch channel listed specifically for Maxeys. The county-level fire dispatch channels in the same county: Oglethorpe County Fire 153.8300 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Maxeys?

We do not have a EMS dispatch channel listed specifically for Maxeys. The county-level EMS dispatch channels in the same county: Oglethorpe County EMS 151.0625 MHz, DMR, CC 12 · TG 4 · SL 1.

What scanner do I need to listen to fire and EMS in Maxeys?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Maxeys?

For Maxeys, start with the Greene/Oconee Co. Simulcast site of Oconee Areawide Radio System (OARS). Its control channels are 769.83125, 770.00625, 771.03125 MHz. Program a control channel first; the scanner finds the voice channels from it.