About Bishop Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bishop: Oconee County Fire 153.4100 MHz, narrow FM, 103.5 PL. County-level ems dispatch that covers Bishop: Oconee County EMS 155.3850 MHz, narrow FM, 186.2 PL. Trunked: Oconee Areawide Radio System (OARS), for example Oconee County Fire talkgroup 37010 (hex 9092).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oconee Areawide Radio System (OARS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bishop, start with the Simulcast site of Clarke County Public Safety P25, about 10 miles away. Its control channels: 852.475, 853.8125, 857.7625 MHz.
Data updated .
Oconee County channels that also cover Bishop
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oconee County Fire | Oconee County Fire – Dispatch | 153.4100 In 158.1600 | 103.5 PL | FMN | WNDK511 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oconee County Fire | Oconee County Fire – Fire Ground | 153.9800 | FMN | WNDK511 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oconee County EMS | Oconee County EMS – Dispatch (Athens Regional Medical Center) | 155.3850 | 186.2 PL | FMN | — |
| Oconee County EMS | Oconee County EMS – Dispatch (St. Mary's Hospital) | 155.4000 | 141.3 PL | FMN | — |
Oconee Areawide Radio System (OARS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Oconee County Fire | Oconee County Fire – Dispatch | 37010 | 9092 | D |
Nearest trunked radio sites
Distances are measured from the center of Bishop.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bishop?
We do not have a fire dispatch channel listed specifically for Bishop. The county-level fire dispatch channels in the same county: Oconee County Fire 153.4100 MHz, narrow FM, 103.5 PL.
What frequency does EMS or the ambulance service use in Bishop?
We do not have a EMS dispatch channel listed specifically for Bishop. The county-level EMS dispatch channels in the same county: Oconee County EMS 155.3850 MHz, narrow FM, 186.2 PL.
Do fire departments and EMS use a trunked radio system in Bishop?
Yes. The county-level systems that cover Bishop are Fire and EMS talkgroups are listed for Oconee Areawide Radio System (OARS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bishop?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bishop?
For Bishop, start with the Simulcast site of Clarke County Public Safety P25. Its control channels are 852.475, 853.8125, 857.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.