About Arnoldsville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Arnoldsville: Oglethorpe County Fire 153.8300 MHz, narrow FM, no tone. County-level ems dispatch that covers Arnoldsville: Oglethorpe County EMS 151.0625 MHz, DMR, CC 12 · TG 4 · SL 1.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Oglethorpe County channels that also cover Arnoldsville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oglethorpe County Fire | Georgia State Patrol Post 17 | 153.8300 | FMN | WQRQ772 | |
| Oglethorpe County Fire | Oglethorpe County Fire – Dispatch | 154.1300 In 156.1875 | 179.9 PL | FMN | WPWK987 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oglethorpe County EMS | Oglethorpe County EMS – Dispatch | 151.0625 In 154.8825 | CC 12 · TG 4 · SL 1 | DMR | WPZX976 |
Nearest trunked radio sites
Distances are measured from the center of Arnoldsville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Arnoldsville?
We do not have a fire dispatch channel listed specifically for Arnoldsville. The county-level fire dispatch channels in the same county: Oglethorpe County Fire 153.8300 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Arnoldsville?
We do not have a EMS dispatch channel listed specifically for Arnoldsville. The county-level EMS dispatch channels in the same county: Oglethorpe County EMS 151.0625 MHz, DMR, CC 12 · TG 4 · SL 1.
What scanner do I need to listen to fire and EMS in Arnoldsville?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Arnoldsville?
For Arnoldsville, start with the Simulcast site of Clarke County Public Safety P25. Its control channels are 852.475, 853.8125, 857.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.