Skip to content

Comer Fire and EMS Frequencies

We do not have frequencies listed specifically for Comer in Madison County, Georgia yet. Countywide channels for Madison County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ila (Banks County Government (GA)), about 14 miles away.

About Comer Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Comer: Madison County Fire 154.3850 MHz, narrow FM, 103.5 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Madison County channels that also cover Comer

Fire Dispatch

Fire Dispatch frequencies for Madison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Madison County FireMadison County Fire – Dispatch154.3850
In 159.1350
103.5 PLFMNWXJ391

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Madison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Madison County FireMadison County Fire – Tactical Channel154.2650FMNWPME339
Madison County FireMadison County Fire – Dispatch154.2950
In 151.0475
218.1 PLFMNWXJ391

Nearest trunked radio sites

Distances are measured from the center of Comer.

Ila · Banks County Government (GA)
Site 6 (hex 6) · about 14 mi away
Control 453.7875
Voice 453.3125, 453.85, 453.975, 460.35
Elberton · Elbert County
Site 1 (hex 1) · about 15 mi away
Voice 152.025, 152.525, 152.645
Simulcast · Clarke County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 6F1 · about 17 mi away
Control 852.475, 853.8125, 857.7625
Voice 851.05, 851.4375, 851.825, 856.7625, 857.4375, 857.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Comer?

We do not have a fire dispatch channel listed specifically for Comer. The county-level fire dispatch channels in the same county: Madison County Fire 154.3850 MHz, narrow FM, 103.5 PL.

What scanner do I need to listen to fire and EMS in Comer?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Comer?

For Comer, start with the Ila site of Banks County Government (GA). Its control channels are 453.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.