About Union Point Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Union Point: Greene County Fire 155.1750 MHz, narrow FM, 94.8 PL. County-level ems dispatch that covers Union Point: Greene County EMS 155.8800 MHz, narrow FM, no tone. Trunked: Oconee Areawide Radio System (OARS), for example Greene County Fire talkgroup 36030 (hex 8cbe).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oconee Areawide Radio System (OARS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Union Point, start with the Greene/Oconee Co. Simulcast site of Oconee Areawide Radio System (OARS), about 15 miles away. Its control channels: 769.83125, 770.00625, 771.03125 MHz.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Greene County channels that also cover Union Point
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County Fire | Fire/EMS Simulcast | 155.1750 | 94.8 PL | FMN | WNGM838 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County Fire | Greene County Fire – Alternate | 154.0100 | FMN | KXB544 | |
| Greene County Fire Expired: Expired 8/21 | Fire Association | 154.2350 | FMN | WNWZ211 | |
| Greene County Fire | Greene County Fire – Alternate | 154.3250 | FMN | KXB544 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County EMS | Greene County EMS – Dispatch | 155.8800 In 155.0250 | FMN | KNID726 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County EMS | Greene County EMS – Alternate | 155.1750 | FMN | WNGM838 |
Oconee Areawide Radio System (OARS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Greene County Fire | Greene County Fire – Dispatch | 36030 | 8cbe | D |
3 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Greene County Fire | Greene County Fire – Tactical Channel | 36031 | 8cbf | D Encrypted |
| Greene County EMS | Greene County EMS – Dispatch | 36040 | 8cc8 | D Encrypted |
| Greene County EMS | EMS-to-Hospital | 36042 | 8cca | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Union Point.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Union Point?
We do not have a fire dispatch channel listed specifically for Union Point. The county-level fire dispatch channels in the same county: Greene County Fire 155.1750 MHz, narrow FM, 94.8 PL.
What frequency does EMS or the ambulance service use in Union Point?
We do not have a EMS dispatch channel listed specifically for Union Point. The county-level EMS dispatch channels in the same county: Greene County EMS 155.8800 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Union Point?
Yes. The county-level systems that cover Union Point are Fire and EMS talkgroups are listed for Oconee Areawide Radio System (OARS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Union Point?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Union Point?
For Union Point, start with the Greene/Oconee Co. Simulcast site of Oconee Areawide Radio System (OARS). Its control channels are 769.83125, 770.00625, 771.03125 MHz. Program a control channel first; the scanner finds the voice channels from it.