Meigs also extends into Thomas County.
About Meigs Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Meigs: Mitchell County Fire 154.3250 MHz, narrow FM, 167.9 PL. County-level ems dispatch that covers Meigs: Mitchell County EMS 150.8450 MHz, narrow FM, 114.8 PL.
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Mitchell County channels that also cover Meigs
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mitchell County Fire | Mitchell County Fire – Dispatch | 154.3250 In 153.9500 | 167.9 PL | FMN | WQQH883 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mitchell County Fire | Mitchell County Fire – Alternate | 154.1600 | FMN | WNJL393 | |
| Mitchell County Fire | Mitchell County Fire – Tactical Channel | 154.2200 | FMN | WQQH883 | |
| Pleasant Grove Fire | Pleasant Grove Fire – Operations | 154.3400 | FMN | WNYI209 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mitchell County EMS | Mitchell County EMS – Dispatch | 150.8450 In 159.8850 | 114.8 PL | FMN | WPJQ408 |
| Mitchell County EMS | Mitchell County EMS – Alternate Dispatch | 155.2800 | FMN | KNIY577 | |
| Mitchell County EMS | Mitchell County EMS – RF Link (Lester/Camilla) | 453.4375 In 458.4375 | FMN | WQFA964 | |
| Mitchell County EMS | Mitchell County EMS – RF Link (Lester/Camilla) | 460.2375 In 465.2375 | FMN | WQFA964 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mitchell County Hospital | Patient Reports | 155.4000 | FMN | KNIY577 |
Nearest trunked radio sites
Distances are measured from the center of Meigs.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Meigs?
We do not have a fire dispatch channel listed specifically for Meigs. The county-level fire dispatch channels in the same county: Mitchell County Fire 154.3250 MHz, narrow FM, 167.9 PL.
What frequency does EMS or the ambulance service use in Meigs?
We do not have a EMS dispatch channel listed specifically for Meigs. The county-level EMS dispatch channels in the same county: Mitchell County EMS 150.8450 MHz, narrow FM, 114.8 PL.
What scanner do I need to listen to fire and EMS in Meigs?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Meigs?
For Meigs, start with the Mitchell Co. Simulcast site of Southwest Georgia Regional Radio System. Its control channels are 855.3875, 856.0375 MHz. Program a control channel first; the scanner finds the voice channels from it.