About Thomas County Fire and EMS Frequencies
Quick answer: Fire dispatch for Thomas County: Thomas County Fire 154.1750 MHz, narrow FM, CSQ. EMS dispatch for Thomas County: Thomas County EMS 155.4000 MHz, narrow FM, no tone.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Southwest Georgia Regional Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Thomas County, start with the Thomas Co. Simulcast site of Southwest Georgia Regional Radio System. Its control channels: 856.3875, 856.9875 MHz.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Thomas County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Thomas County Fire | 800 DTRS Simulcast | 154.1750 | CSQ | FMN | WNLA311 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Thomas County Fire | Thomas County Fire – Fire Ground | 152.4200 | 205 DPL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Thomas County EMS | Thomas County EMS – Dispatch | 155.4000 | FMN | WZU394 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Thomas County Hospital | EMS-to-Archbold Hospital (Patient Reports) | 155.3400 | 179.9 PL | FMN | WZU394 |
Thomas County trunked talkgroups
Southwest Georgia Regional Radio System
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Thomas County Fire | Thomas County Fire – Dispatch (County) | 2113 | 841 | T Encrypted |
| Thomas County EMS | Thomas County EMS – Dispatch (County) | 2110 | 83e | T Encrypted |
Radio system sites in Thomas County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Thomas County
Common questions
What frequency does the fire department use in Thomas County?
Fire dispatch channels listed for Thomas County: Thomas County Fire 154.1750 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Thomas County?
EMS dispatch channels listed for Thomas County: Thomas County EMS 155.4000 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Thomas County?
Yes. Fire and EMS talkgroups are listed for Southwest Georgia Regional Radio System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Thomas County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Thomas County?
For Thomas County, start with the Thomas Co. Simulcast site of Southwest Georgia Regional Radio System. Its control channels are 856.3875, 856.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Thomas County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Thomas County are marked encrypted.
Are Thomas County fire and EMS talkgroups encrypted?
2 of the 2 talkgroups listed for Thomas County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.