About Coolidge Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Coolidge: Thomas County Fire 154.1750 MHz, narrow FM, CSQ. County-level ems dispatch that covers Coolidge: Thomas County EMS 155.4000 MHz, narrow FM, no tone.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Southwest Georgia Regional Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Coolidge, start with the Thomas Co. Simulcast site of Southwest Georgia Regional Radio System, about 10 miles away. Its control channels: 856.3875, 856.9875 MHz.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Thomas County channels that also cover Coolidge
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Thomas County Fire | 800 DTRS Simulcast | 154.1750 | CSQ | FMN | WNLA311 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Thomas County Fire | Thomas County Fire – Fire Ground | 152.4200 | 205 DPL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Thomas County EMS | Thomas County EMS – Dispatch | 155.4000 | FMN | WZU394 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Thomas County Hospital | EMS-to-Archbold Hospital (Patient Reports) | 155.3400 | 179.9 PL | FMN | WZU394 |
Southwest Georgia Regional Radio System
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Thomas County Fire | Thomas County Fire – Dispatch (County) | 2113 | 841 | T Encrypted |
| Thomas County EMS | Thomas County EMS – Dispatch (County) | 2110 | 83e | T Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Coolidge.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Coolidge?
We do not have a fire dispatch channel listed specifically for Coolidge. The county-level fire dispatch channels in the same county: Thomas County Fire 154.1750 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Coolidge?
We do not have a EMS dispatch channel listed specifically for Coolidge. The county-level EMS dispatch channels in the same county: Thomas County EMS 155.4000 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Coolidge?
Yes. The county-level systems that cover Coolidge are Fire and EMS talkgroups are listed for Southwest Georgia Regional Radio System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Coolidge?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Coolidge?
For Coolidge, start with the Thomas Co. Simulcast site of Southwest Georgia Regional Radio System. Its control channels are 856.3875, 856.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.