About Funston Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Funston: Colquitt County Fire/EMS 154.4450 MHz, narrow FM, 179.9 PL. County-level ems dispatch that covers Funston: Colquitt County Fire/EMS 155.1450 MHz, narrow FM, 173.8 PL.
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Colquitt County channels that also cover Funston
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Colquitt County Fire/EMS | Colquitt County Fire/EMS – Dispatch | 154.4450 In 154.0100 | 179.9 PL | FMN | WXR330 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Colquitt County Fire/EMS | Spence Field EMA Repeater | 151.1150 In 159.1350 | 179.9 PL | FMN | WQBD622 |
| Colquitt County Fire/EMS | Colquitt County Fire/EMS – Fire Ground | 154.2350 | 179.9 PL | FMN | WXR330 |
| Colquitt County Fire/EMS | Colquitt County Fire/EMS – Fire Ground | 154.2800 | CSQ | FMN | WXR330 |
| Colquitt County Fire/EMS | Autreyville Fire | 154.4000 In 150.7900 | 179.9 PL | FMN | WQWS229 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Colquitt County Fire/EMS | Colquitt County Fire/EMS – Fire Ground | 151.0325 | CSQ | FMN | WQRM445 |
| Colquitt County Fire/EMS | Colquitt County Fire/EMS – Tactical Repeater | 151.1675 In 159.1725 | 210.7 PL | FMN | WQRM445 |
| Colquitt County Fire/EMS | Colquitt County Fire/EMS – Talk-Around | 152.3300 In 157.5900 | 179.9 PL | FMN | WPQH982 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Colquitt County Fire/EMS | Colquitt County Fire/EMS – Dispatch | 155.1450 In 159.0150 | 173.8 PL | FMN | WQGU534 |
Nearest trunked radio sites
Distances are measured from the center of Funston.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Funston?
We do not have a fire dispatch channel listed specifically for Funston. The county-level fire dispatch channels in the same county: Colquitt County Fire/EMS 154.4450 MHz, narrow FM, 179.9 PL.
What frequency does EMS or the ambulance service use in Funston?
We do not have a EMS dispatch channel listed specifically for Funston. The county-level EMS dispatch channels in the same county: Colquitt County Fire/EMS 155.1450 MHz, narrow FM, 173.8 PL.
What scanner do I need to listen to fire and EMS in Funston?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Funston?
For Funston, start with the Thomas Co. Simulcast site of Southwest Georgia Regional Radio System. Its control channels are 856.3875, 856.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.