Skip to content

Geneva County Fire and EMS Frequencies

Geneva County in Alabama has 3 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 19 cities and communities below for local fire departments and EMS agencies.

About Geneva County Fire and EMS Frequencies

Quick answer: Fire dispatch for Geneva County: Alabama Foresty Commission Fire 453.5500 MHz, narrow FM, 664 DPL; Rural Fire 159.2325 MHz, NXDN48, RAN 1. Trunked: S and P Communications, for example Geneva County Fire talkgroup 3439 (hex d6f).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: S and P Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Geneva County, start with the Samson (*) site of S and P Communications. Its control channels: 156.105 MHz.

Data updated .

Geneva County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Geneva County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alabama Foresty Commission FireRural Fire Suppression453.5500
In 458.5500
664 DPLFMNWNJW306
Rural FireRural Fire159.2325RAN 1NXDN48WQPP657

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Geneva County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hartford Bellwood Volunteer Fire DepartmentHartford Bellwood Volunteer Fire Department – Fire Ground155.8050162 DPLFMN—

Geneva County trunked talkgroups

S and P Communications

S and P Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Geneva County FireGeneva County Fire – Dispatch (Countywide)3439d6fD
Private EMS ProvidersHaynes EMS – Dispatch801321D
Private EMS ProvidersHaynes EMS – Events802322D

Radio system sites in Geneva County

Program the control channel first; your scanner finds the voice channels from it.

Samson (*) · S and P Communications
Site 24 (hex 18)
Control 156.105
Voice 154.4975, 158.3775
Hartford West · S and P Communications
Site 25 (hex 19)
Control 155.115
Voice 155.7975, 158.385
Slocomb (*) · S and P Communications
Site 26 (hex 1A)
Control 159.2325
Voice 158.205, 159.45, 160.0575
Hartford East · S and P Communications
Site 27 (hex 1B)
Control 152.2925
Voice 153.0275, 153.29
Geneva · S and P Communications
Site 28 (hex 1C)
Control 153.245
Voice 153.0275

Cities & communities in Geneva County

Common questions

What frequency does the fire department use in Geneva County?

Fire dispatch channels listed for Geneva County: Alabama Foresty Commission Fire 453.5500 MHz, narrow FM, 664 DPL; Rural Fire 159.2325 MHz, NXDN48, RAN 1.

Do fire departments and EMS use a trunked radio system in Geneva County?

Yes. Fire and EMS talkgroups are listed for S and P Communications: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Geneva County?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Geneva County?

For Geneva County, start with the Samson (*) site of S and P Communications. Its control channels are 156.105 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Geneva County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Geneva County are marked encrypted.

Are Geneva County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Geneva County are marked encrypted.