Skip to content

Taylor Fire and EMS Frequencies

We do not have frequencies listed specifically for Taylor in Geneva County, Alabama yet. Countywide channels for Geneva County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Dothan South (Houston County Public Safety (AL)), about 5 miles away.

About Taylor Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Taylor: Alabama Foresty Commission Fire 453.5500 MHz, narrow FM, 664 DPL; Rural Fire 159.2325 MHz, NXDN48, RAN 1. Trunked: S and P Communications, for example Geneva County Fire talkgroup 3439 (hex d6f).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: S and P Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Taylor, start with the Dothan South site of Houston County Public Safety (AL), about 5 miles away. Its control channels: 453.475, 460.3625 MHz.

Data updated .

Geneva County channels that also cover Taylor

Fire Dispatch

Fire Dispatch frequencies for Geneva County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alabama Foresty Commission FireRural Fire Suppression453.5500
In 458.5500
664 DPLFMNWNJW306
Rural FireRural Fire159.2325RAN 1NXDN48WQPP657

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Geneva County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hartford Bellwood Volunteer Fire DepartmentHartford Bellwood Volunteer Fire Department – Fire Ground155.8050162 DPLFMN—

S and P Communications

S and P Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Geneva County FireGeneva County Fire – Dispatch (Countywide)3439d6fD
Private EMS ProvidersHaynes EMS – Dispatch801321D
Private EMS ProvidersHaynes EMS – Events802322D

Nearest trunked radio sites

Distances are measured from the center of Taylor.

Dothan South · Houston County Public Safety (AL)
Site 1 (hex 1) · about 5 mi away
Control 453.475, 460.3625
Voice 453.075, 453.8, 460.175
Dothan North · Houston County Public Safety (AL)
Site 2 (hex 2) · about 5 mi away
Control 460.325, 460.625
Voice 460.0875, 460.1625, 460.4125
Dothan Simulcast · Alabama Interoperable Radio System (AIRS)
RFSS 6 · Site 1 (hex 1) · NAC 460 · about 6 mi away
Control 851.7375, 852.15, 852.5375, 852.85
Voice 853.125, 854.0375, 854.3125, 854.8625, 855.3875, 855.9875, 856.0125, 856.4875, 856.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Taylor?

We do not have a fire dispatch channel listed specifically for Taylor. The county-level fire dispatch channels in the same county: Alabama Foresty Commission Fire 453.5500 MHz, narrow FM, 664 DPL; Rural Fire 159.2325 MHz, NXDN48, RAN 1.

Do fire departments and EMS use a trunked radio system in Taylor?

Yes. The county-level systems that cover Taylor are Fire and EMS talkgroups are listed for S and P Communications: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Taylor?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Taylor?

For Taylor, start with the Dothan South site of Houston County Public Safety (AL). Its control channels are 453.475, 460.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.