About Dothan Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Dothan: Henry County Fire 453.5500 MHz, narrow FM, no tone.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Metrolink NXDN: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Dothan, start with the Dothan Simulcast site of Alabama Interoperable Radio System (AIRS), about 1 miles away. Its control channels: 851.7375, 852.15, 852.5375 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Henry County channels that also cover Dothan
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Henry County Fire | Henry County Fire – Dispatch (not 136.5 PL) | 453.5500 In 458.5500 | FMN | KNGW218 |
Metrolink NXDN
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Henry County, AL | Henry County, AL – Dispatch | 176 | b0 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Dothan.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Dothan?
We do not have a fire dispatch channel listed specifically for Dothan. The county-level fire dispatch channels in the same county: Henry County Fire 453.5500 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Dothan?
Yes. The county-level systems that cover Dothan are Fire and EMS talkgroups are listed for Metrolink NXDN: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Dothan?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Dothan?
For Dothan, start with the Dothan Simulcast site of Alabama Interoperable Radio System (AIRS). Its control channels are 851.7375, 852.15, 852.5375, 852.85 MHz. Program a control channel first; the scanner finds the voice channels from it.