Skip to content

High Bluff Fire and EMS Frequencies

We do not have frequencies listed specifically for High Bluff in Geneva County, Alabama yet. Countywide channels for Geneva County that may also cover this area are shown below when we have them.

About High Bluff Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers High Bluff: Alabama Foresty Commission Fire 453.5500 MHz, narrow FM, 664 DPL; Rural Fire 159.2325 MHz, NXDN48, RAN 1. Trunked: S and P Communications, for example Geneva County Fire talkgroup 3439 (hex d6f).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: S and P Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Geneva County channels that also cover High Bluff

Fire Dispatch

Fire Dispatch frequencies for Geneva County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alabama Foresty Commission FireRural Fire Suppression453.5500
In 458.5500
664 DPLFMNWNJW306
Rural FireRural Fire159.2325RAN 1NXDN48WQPP657

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Geneva County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hartford Bellwood Volunteer Fire DepartmentHartford Bellwood Volunteer Fire Department – Fire Ground155.8050162 DPLFMN—

S and P Communications

S and P Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Geneva County FireGeneva County Fire – Dispatch (Countywide)3439d6fD
Private EMS ProvidersHaynes EMS – Dispatch801321D
Private EMS ProvidersHaynes EMS – Events802322D

Common questions

What frequency does the fire department use in High Bluff?

We do not have a fire dispatch channel listed specifically for High Bluff. The county-level fire dispatch channels in the same county: Alabama Foresty Commission Fire 453.5500 MHz, narrow FM, 664 DPL; Rural Fire 159.2325 MHz, NXDN48, RAN 1.

Do fire departments and EMS use a trunked radio system in High Bluff?

Yes. The county-level systems that cover High Bluff are Fire and EMS talkgroups are listed for S and P Communications: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in High Bluff?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.