About Highnote Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Highnote: Alabama Foresty Commission Fire 453.5500 MHz, narrow FM, 664 DPL; Rural Fire 159.2325 MHz, NXDN48, RAN 1. Trunked: S and P Communications, for example Geneva County Fire talkgroup 3439 (hex d6f).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: S and P Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
Data updated .
Geneva County channels that also cover Highnote
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alabama Foresty Commission Fire | Rural Fire Suppression | 453.5500 In 458.5500 | 664 DPL | FMN | WNJW306 |
| Rural Fire | Rural Fire | 159.2325 | RAN 1 | NXDN48 | WQPP657 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hartford Bellwood Volunteer Fire Department | Hartford Bellwood Volunteer Fire Department – Fire Ground | 155.8050 | 162 DPL | FMN | — |
S and P Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Geneva County Fire | Geneva County Fire – Dispatch (Countywide) | 3439 | d6f | D |
| Private EMS Providers | Haynes EMS – Dispatch | 801 | 321 | D |
| Private EMS Providers | Haynes EMS – Events | 802 | 322 | D |
Common questions
What frequency does the fire department use in Highnote?
We do not have a fire dispatch channel listed specifically for Highnote. The county-level fire dispatch channels in the same county: Alabama Foresty Commission Fire 453.5500 MHz, narrow FM, 664 DPL; Rural Fire 159.2325 MHz, NXDN48, RAN 1.
Do fire departments and EMS use a trunked radio system in Highnote?
Yes. The county-level systems that cover Highnote are Fire and EMS talkgroups are listed for S and P Communications: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Highnote?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.