Skip to content

Uvalde County Fire and EMS Frequencies

Uvalde County in Texas has 4 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Uvalde County Fire and EMS Frequencies

Quick answer: EMS dispatch for Uvalde County: Uvalde EMS, Inc 155.1000 MHz, FM, 186.2 PL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Uvalde County EMS talkgroup 3928 (hex f58).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Uvalde County, start with the Uvalde site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels: 154.8825, 155.67 MHz.

Data updated .

Uvalde County conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Uvalde County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Reagan Wells Volunteer Fire DepartmentReagan Wells Volunteer Fire Department – Tactical Channel155.8500
In 153.8750
141.3 PLFMNWQAC657

EMS Dispatch

EMS Dispatch frequencies for Uvalde County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Uvalde EMS, IncUvalde EMS Primary155.1000
In 158.7750
186.2 PLFMWPXD888

Hospitals & Medical

Hospitals & Medical frequencies for Uvalde County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Uvalde County HospitalHospital Authority154.8600
In 159.4200
FMNWQCG643
Uvalde County HospitalHospital Authority155.9550
In 151.2350
FMNWQCG643

Uvalde County trunked talkgroups

Greater Austin/Travis Regional Radio System (GATRRS)

Greater Austin/Travis Regional Radio System (GATRRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Uvalde County EMSUvalde County EMS – Dispatch3928f58D

Radio system sites in Uvalde County

Program the control channel first; your scanner finds the voice channels from it.

Uvalde · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 14 (hex E) · NAC 136
Control 154.8825, 155.67
Voice 151.115, 156.2025
Concan · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 19 (hex 13) · NAC 139
Control 158.8275, 159.1575
Voice 159.12
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Uvalde County

Common questions

What frequency does EMS or the ambulance service use in Uvalde County?

EMS dispatch channels listed for Uvalde County: Uvalde EMS, Inc 155.1000 MHz, FM, 186.2 PL.

Do fire departments and EMS use a trunked radio system in Uvalde County?

Yes. Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Uvalde County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Uvalde County?

For Uvalde County, start with the Uvalde site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 154.8825, 155.67 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Uvalde County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Uvalde County are marked encrypted.

Are Uvalde County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Uvalde County are marked encrypted.